 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PK Pulstors Resistors for high voltage peak pulsing energy control , high frequency non-inductive PK;Pulse Killer; Pulstors,High Voltage(Vp),Fastest Pulsing Energy Willow offers the `Pulstor' series to meet high frequency PULSING powers; applications short width but high voltage high energy controlling , pulse energy on the skin-effect at high frequency, various range of resistive value. DIMENSIONS [mm] 35 5 A B C Model Nr. Power (W) Resistance [ ohm ] Min. Max. 1R 3R 5R 2M 2M 2M Dimensions in millimeters A 24.0+/-1.0 39.0+/-1.0 52.0+/-1.0 42.0+/-1.5 60.0+/-1.5 B (dia) 8.0+/-1.5 8.0+/-1.5 8.0+/-1.0 18.0+/-1.0 18.0+/-1.0 C 1.0 x 2wire Axial 1.0 x 2wire Axial 1.0 x 2wire Axial N/A N/A pins * spacing (center to center) N/A N/A N/A 11.5+/-0.2 11.5+/-0.2 pins * width (center to center) N/A N/A N/A 49.3+/-0.3 49.3+/-0.3 pin size N/A N/A N/A 0.3 x 2.5 0.3 x 2.5 SMD type available available available ** ** PK2 PK3 PK5 PK10 PK15 2 3.5 5 10 15 1.5R 2M 2.5R 2M ** If neccesary SMD , then the user able to bend 4 terminals in semi-flexible which made for the soldering pads * pins made of brass , on semi-flexible status , adjustable pins width Willow Technologies Ltd. Shawlands Court, Newchapel Road, Lingfield, Surrey, RH7 6BL, United Kingdom. http://www.willow.co.uk + 44 (0) 1342 835234 + 44 (0) 1342 834306 info@willow.co.uk PK PK2 PK3 PK5 PK10 PK15 Pulstors Resistors for high voltage peak pulsing energy control , high frequency non-inductive 1) Voltage applicable R-Value[} 1 ~ 20K 3 ~ 20K 5 ~ 20K 1.5 ~ 20K 2.5 ~ 20K Model Nr. Repetive Pulse [kVp] 1.5 2.0 2.5 3 3.5 Max SinglePulse Energy [J] * 300 500 950 1500 2500 2) Voltage at 22k~2M Max. Continuous Voltage [kVp] 3.5 7 10 8 12 1.2/50 single pulse 7 14 20 15 22 + Custom R-Value on Request. ++ high voltage energy products voulunerble by a lot of factors , so would better use small q'ty as an order first and get test results, place main order * Pulse width shall be less than 10 at 1R ~ 20k ,and less than 10ms at 22k~2M 1) less than 10 pulse width, limited by allowable power rating 2) continous pulsing or dc , ac, they are limited by allowable power rating DERATING CURVE Rated Power or Voltage% SPECIFICATIONS Resistance Tolerance : 10% Typ, 2%, 5% availble Temperature Coefficient : Std. 100ppm/C typ., referenced to 25C, from -15C to +105C, other TCR available upon requests. Thermal Shock : Mil-Std-202F, Method107 Cond. C, dR 2.0% typ. 75 5 75 35 00 80 60 40 0 0 5 75 5 a b Ambient-Temperature (C) cf. a ; epoxy conformal coat b; glass coat Load Life : 1.000 hours at rated Pulse power dR 5.0% Repetive High Voltage Impulsing : 10,000cycles 1sec on 1sec off dR 2.0% Moisture Resistance : Mil-Std-202, Method 106, dR 1.0% typ. Lead Material : PK2 PK3 PK5 ; dia 1mm tinned copper wire PK10 PK15 ; Ni plated brass 4 terminals in radial Insulation Resistance : 10,000Megohms Min. Termination Cap of Material : Tinned Cap / Ni plated brass cap Encapsulation : High temp. epoxy conformal / Silicone conformal / Glass coat cf.: The described specifications & dimensions subject to change without notice. Willow Technologies Ltd. Shawlands Court, Newchapel Road, Lingfield, Surrey, RH7 6BL, United Kingdom. http://www.willow.co.uk + 44 (0) 1342 835234 + 44 (0) 1342 834306 info@willow.co.uk designed by jonaldo , France |
Price & Availability of PK5
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |